Kathy & Jim Sawada Toronto, Canada

EXOTIC WOOD JEWELRY BOX
Bubinga With Lacewood Accents

$550.00
(TAX-FREE)

Click here to enlarge this picture

.....

Click buttons to change view. Click main picture to enlarge.

The interior of this beautiful jewelry box has ample space for earrings, cuff links, necklaces, bracelets and watches. The one tray has eight ring inserts, each of which can accommodate two rings, earrings, or cuff links.

Bubinga has a beautiful grain pattern and vibrant colours. The scene in the centre of the top is bordered with Lacewood and Cherry bands which are subtly accentuated with Padauk veneer edges. The box "floats" on a recessed base of Bubinga. 

The drawer sides and dividers in the interior are made from solid Cherry.

Notice how the interior of the top is finished as beautifully as the exterior. That takes extra time and material .... but, the result is well worth it.

No stains or dyes have been used. The rich colours that you see are the natural colours of the finished woods.


SPECIFICATIONS

Dimensions:

Overall exterior dimensions are about 11.7" x 8.4" x 5.1 "  (29.7 x 21.0 x 13.0 cm)

The removable trays are about 0.8" deep and have these compartments:-
(one)     2.4" x  6.8"   ( 6.0  x  17.1 cm)
(one)     1.8" x  6.8"   ( 4.4  x  17.1 cm) with 8 ring inserts
(six)       2.2" x 2.4"   ( 5.6  x  6.0 cm)

The  compartments below the trays are about 1.1" (2.9 cm) deep. Inside dimensions of the compartments are about:-
(one)        6.9" x 5.1 "     (17.5 x  12.9 cm)
(six)         2.5" x 2.2"      ( 6.4  x  5.6 cm)  

The drawer is about 1.1" (2.7 cm) deep. 
The inside dimensions of the compartments are about:-
(one)  4.9"  x 6.8"    ( 11.9   x 17.2 cm)
(six)   2.1"  x 2.3"    ( 5.4  x 5.7 cm)

Finish:

Interior and exterior are finished with Danish Oil, a penetrating resin. Exterior is further finished with a three-stage wax process, the final stage being carnauba.  The resultant finish is smooth, durable, and appealing.

Woods Used:

Bubinga, Padauk, Lacewood, Cherry 

Exterior:

Solid Lacewood drawer pulls.

Mitred corners reinforced with Lacewood keys.

Sides are solid 1/2" (13  mm) thick Bubinga

 

Top is made from solid woods into an assembly about 1/2" (13 mm) thick. It is then re-sawn into two pieces about 1/8" (3mm) thick which are laminated to both sides of 1/4" (6 mm) plywood. This construction not only makes the interior of the top as attractive as the exterior, but also prevents warping of the top.

 

Interior:

Solid brass quadrant hinges.

Drawer sides, trays and dividers are solid Cherry

Interior is lined with a luxurious dark red faux-velvet. 
Ring inserts are covered in the same luxurious material.