Kathy & Jim Sawada Toronto, Canada

Santos Rosewood With Maple Burl

Click here to enlarge this picture


Click buttons to change view. Click main picture to enlarge.  

The interior of this beautiful jewelry box has ample space for earrings, cuff links, necklaces, bracelets and watches. The one tray has eight padded inserts, each of which can accommodate two rings, earrings, or cuff links.

This box was made from Santos Rosewood. The top has a unique piece of Maple burl, framed by bands of Santos Rosewood, each separated and defined by strips of Maple veneer.

The drawer sides and dividers in the interior are made from solid Black Walnut.

No stains or dyes have been used. The rich colours that you see are the natural colours of the finished woods.



Overall exterior dimensions are about 12.5" x 9.1" x 5"  (31.2 x 23.2 x 12.7 cm)

The trays are about 7/8" deep (2.2 cm) with these compartments:-
(one)     2.4" x  6.9"   ( 5.9  x  17.5 cm)
(one)     2.0" x  6.9"   ( 5.1  x  17.5 cm) with 8 padded inserts
(six)       2.4" x  2.3"   ( 5.9  x  5.7 cm)

The  compartments below the trays are about 1" (2.5 cm) deep. Inside dimensions of the compartments are about:-
(one)       5.3" x 7"   (13.3 x  17.8 cm)
(six)        2.5" x  2.3"   ( 6.4  x  5.7 cm)

The drawer is about 1.3" (3.2 cm) deep. 
The inside dimensions of the compartments are about:-
(one)       4.9"  x   6.8"  ( 12.5   x 17.2 cm)
(six)        2.3"  x   2.1"   ( 5.7 x 5.4 cm)


Interior and exterior are finished with Danish Oil, a penetrating resin. Exterior is further finished with a three-stage wax process, the final stage being carnauba.  The resultant finish is smooth, durable, and appealing.

Woods Used:

Black Walnut, Santos Rosewood, Maple burl


Solid brass drawer pulls with Maple burl inserts.

Mitred corners reinforced with Maple burl keys

Sides are solid 1/2" (13 mm) thick Santos Rosewood

Top is made from solid woods into an assembly about 1/2" (13 mm) thick. It is then re-sawn into two pieces about 1/8" (3mm) thick which are laminated to both sides of 1/4" (6 mm) plywood. This construction not only makes the interior of the top as attractive as the exterior, but also prevents warping of the top.



Solid brass quadrant hinges.

Drawer sides, trays and dividers are solid Black Walnut.

Interior is lined with a luxurious velveteen.