Kathy & Jim Sawada Toronto, Canada

EXOTIC WOOD JEWELRY BOX
Black Limba With Nogal Accents

$400.00
(TAX-FREE)

Click here to enlarge this picture

.....

Click buttons to change view. Click main picture to enlarge.


This jewelry box has ample space for earrings, cuff links, necklaces, watches. The one tray has eight padded inserts for rings, earrings, and cuff links.

The Black Limba in this box has a spectacular grain pattern and rich, varying colours. The scene on the top is framed by bands of Black Limba, separated and defined by strips of black veneer.

The tray sides and dividers in the interior are solid Black Walnut 

Except for black veneer, no stains or dyes have been used. The rich colours that you see are the natural colours of the finished woods.


SPECIFICATIONS

Dimensions:

Overall exterior dimensions are about 12" x 9" x 4" (30.5 x 22.9 x 10.2 cm)

The interior lower level is about 1.1" (2.9 cm) deep with these compartments:-
~ one about 6.8" x 4.8"   (17.1 x 12.1 cm)
~ six  about 2.3" x 2.1"  (5.7 x 5.4 cm)

The removable trays are about 0.9" (2.2 cm) deep configured as follows:-
~  one has six compartments about 2.1" x 2.1"  (5.4 x 5.4 cm)
~  the other has
          ~ 1 compartment about 2.1" x 6.7"  (5.4 x 16.8 cm)
          ~ 8 padded inserts, each about 1.9" (4.8 cm) wide and about 0.8" (19 mm) deep
   NOTE: Maximum clearance above the top of the padded inserts is about 0.4" (10 mm)

Finish:

Interior and exterior are finished with Danish Oil, a penetrating resin. Exterior is further finished with a three-stage wax process, the final stage being carnauba.  The resultant finish is smooth, durable, and appealing.

Woods Used:

Black Limba, Nogal

Exterior:

The sides of the box are made from a single board with waterfall mitre joints. That allows the natural pattern of the wood grain to flow all the way around the box. Grain is matched on three corners.

Mitred corners reinforced with Nogal keys.

Sides are solid 1/2" (13mm) thick Black Limba

Top is made from solid woods into an assembly about 1/2" (13 mm) thick. It is then re-sawn into two pieces about 1/8" (3mm) thick which are laminated to both sides of 1/4" (6 mm) plywood. This construction not only makes the interior of the top as attractive as the exterior, but also prevents warping of the top.

Interior:

Solid brass quadrant hinges.

Tray sides and dividers are Black Walnut.

Interior is  lined with durable faux suede.