The interior of this beautiful jewelry box has ample space for earrings, cuff links, necklaces, bracelets and watches. The one tray has eight padded inserts, each of which can accommodate two rings, earrings, or cuff links.

The body of this box was made from Santos Rosewood. The scene in the centre of the top is framed by bands of Santos Rosewood, separated and defined by strips of black veneer. The box "floats" on a recessed base of Santos Rosewood.

Except for black veneer, no stains or dyes have been used. The rich colours that you see are the natural colours of the finished woods.

---

SPECIFICATIONS

Dimensions:

Overall exterior dimensions are about 11.9" x 8.4" x 5.0 "  (29.9 x 21.3 x 12.7 cm)

There is about 0.4" (1.0 cm) headroom in the inside of the top of the box into which jewelry can extend from the trays.

The removable trays are about 0.8" (1.9 cm) deep and have these compartments:-
(one)     2.3" x 6.8"  (5.7 x 17.2 cm)
(one)     2.0" x 6.8"  (5.1 x 17.2 cm) with 8 padded inserts
(six)      2.1" x 2.3"  (5.4 x 5.7 cm)

The  compartments below the trays are about 0.8" (1.9 cm) deep. Inside dimensions of the compartments are about:-
(one)        7.0" x 5.1 "  (17.8 x 13.0 cm)
(six)         2.5" x 2.3"   ( 6.4 x 5.7 cm)  

The drawer is about 1.0" (2.5 cm) deep. Inside dimensions of the compartments are about:-
(one)  6.5" x 4.6"   (16.5  x 11.8 cm)
(six)   2.0" x 2.3"   (5.1 x 5.7 cm)

Finish:

Interior and exterior are finished with Danish Oil, a penetrating resin. Exterior is further finished with a three-stage wax process, the final stage being carnauba.  The resultant finish is smooth, durable, and appealing.

Woods Used:

Santos Rosewood, Black Walnut

Exterior:

	The sides of the box are made from a single board with waterfall mitre joints. That allows the natural pattern of the wood grain to flow all the way around the box. Grain is matched on three corners. Santos Rosewood drawer pulls. Mitred corners reinforced with Santos Rosewood keys. Sides are solid 1/2" (13  mm) thick Santos Rosewood
Top is made from solid woods into an assembly about 1/2" (13 mm) thick. It is then re-sawn into two pieces about 1/8" (3mm) thick which are laminated to both sides of 1/4" (6 mm) plywood. This construction prevents warping of the top.

 

Interior:

Solid brass quadrant hinges.

Drawer sides, trays and dividers are solid Black Walnut

Interior is lined with a luxurious velveteen fabric. 
Padded inserts are covered in the same material.