Kathy & Jim Sawada Toronto, Canada

EXOTIC WOOD WATCH BOX
Black Limba With Wenge Accents

$475.00
(TAX-FREE)

Click here to enlarge this picture

.....

Click buttons to change view. Click main picture to enlarge.


The interior of this beautiful jewelry box has four compartments with handmade pillows for watches and bracelets. The ten padded inserts will accommodate a collection of rings and cuff links. Watch bands, necklaces and bracelets can be stored in and under the removable trays.

The Black Limba in this box has a spectacular grain pattern and rich, varying colours. The scene on the top is framed by bands of Black Limba and Wenge, separated and defined by strips of black veneer.

The trays and dividers in the interior are made from solid Black Walnut.

Except for black veneer, no stains or dyes have been used. The rich colours that you see are the natural colours of the finished woods.


SPECIFICATIONS

Dimensions:

Overall exterior dimensions are about 11.3" x 9" x 3.5"  (29.2 x 22.9 x 8.9 cm)

Four 2.3" (5.7 cm) deep watch compartments, each about 3.9" x 2.6" (9.8 x 6.7 cm)

The removable tray is about 1" (2.5 cm) deep. One side has ten 2.5" (6.4 cm) wide padded inserts for rings and cuff links. The other side has one compartment about 7.4" by 2.5" (18.7 x 6.4 cm).

The  area below the tray is about 1" (2.5 cm) deep with six comaprtments, each about 2.6" x 2.4" (6.7 x 6.0 cm).

Finish:

Interior and exterior are finished with Danish Oil, a penetrating resin. Exterior is further finished with a three-stage wax process, the final stage being carnauba.  The resultant finish is smooth, durable, and appealing.

Woods Used:

Black Limba, Wenge

Exterior:

The sides of the box are made from a single board with waterfall mitre joints. That allows the natural pattern of the wood grain to flow all the way around the box. Grain is matched on three corners.

Brass push button locking catch

Mitred corners reinforced with keys of Wenge

Sides are solid 5/8" (16 mm) thick Black Limba

 

Top is made from solid woods into an assembly about 1/2" (13 mm) thick. It is then re-sawn into two pieces about 1/8" (3mm) thick which are laminated to both sides of 1/4" (6 mm) plywood. This construction not only makes the interior of the top as attractive as the exterior, but also prevents warping of the top.

 

Interior:

Solid brass quadrant hinges.

Tray sides and dividers are solid Black Walnut.

Interior is lined with velveteen. 
Watch pillows and padded inserts are covered in the same material.