The interior of this beautiful jewelry box has ample space for earrings, cuff links, necklaces, bracelets and watches. The one tray has eight padded inserts, each of which can accommodate two rings, earrings, or cuff links.

This box was made from dark Roasted Curly Maple. The centre of the top is Maple burl, framed by bands of dark Roasted Curly Maple, each separated and defined by strips of black veneer.

Except for black veneer, no stains or dyes have been used. The rich colours that you see are the natural colours of the finished woods.

---

SPECIFICATIONS

Dimensions:

Overall exterior dimensions are about 12.5" x 9.1" x 5"  (31.2 x 23.2 x 12.7 cm)

The trays are about 7/8" deep (2.2 cm) with these compartments:-
(one)     2.4" x  6.9"   ( 5.9  x  17.5 cm)
(one)     2.0" x  6.9"   ( 5.1  x  17.5 cm) with 8 padded inserts
(six)       2.4" x  2.3"   ( 5.9  x  5.7 cm)

The  compartments below the trays are about 1" (2.5 cm) deep. Inside dimensions of the compartments are about:-
(one)       5.3" x 7"   (13.3 x  17.8 cm)
(six)        2.5" x  2.3"   ( 6.4  x  5.7 cm)

The drawer is about 1.3" (3.2 cm) deep. 
The inside dimensions of the compartments are about:-
(one)       4.9"  x   6.8"  ( 12.5   x 17.2 cm)
(six)        2.3"  x   2.1"   ( 5.7 x 5.4 cm)

Finish:

Interior and exterior are finished with an Osmo micro-porous wood oil. The resultant low-lustre finish is smooth, durable, and appealing. Trays, dividers and supports are finished with Danish Oil, a penetrating resin.

Woods Used:

Dark Roasted Curly Maple, Maple burl, Black Walnut

Exterior:

	The sides of the box are made from a single board with waterfall mitre joints. That allows the natural pattern of the wood grain to flow all the way around the box. Grain is matched on three corners. Solid brass drawer pulls with Maple burl inserts. Mitred corners reinforced with Roasted Maple keys Sides are solid 1/2" (13 mm) thick Dark Roasted Curly Maple
Top is made from solid woods into an assembly about 1/2" (13 mm) thick. It is then re-sawn into two pieces about 1/8" (3mm) thick which are laminated to both sides of 1/4" (6 mm) plywood. This construction not only makes the interior of the top as attractive as the exterior, but also prevents warping of the top.

 

Interior:

Solid brass quadrant hinges.

Drawer sides, trays and dividers are solid Black Walnut.

Interior is lined with a luxurious velveteen woven fabric.